Market Forge Sterilmatic STME-L Benchtop or Floor Model Autoclave Sterilizer

Product Description
The Market Forge Sterilmatic STM-EL laboratory model sterilizes and dries any material normally processed by autoclaving. A built-in control maintains the operating temperature at a preset level up to 121°C (250°F) for standard models (see stock #N725). Has an adjustable control and can be preset up to 121°C (250°F) or 110°C (230°F). Timed sterilization (0-60 min) starts after operating temperature is reached. The 103kPa (15psi) operating pressure is reached in a few minutes. Door is self-sealing and cannot be opened until steam pressure is completely exhausted. Exhaust selector may be set for liquids, instruments, or soft goods. Sterilizers feature a 0-207kPa (0-30psi) pressure gauge, temperature gauge, low water cut-off, safety valve, thermostatic steam trap, and signal light. Stand is available at additional cost. Required connections: drain, 13mm (1/2 in.) FPT or 16mm (5/8 in.) O.D.; copper steam exhaust connection, 10mm (3/8 in.) IPS. All models available for operation on single- or three-phase, three- or four-wire system. UL listed and CSA certified. 84 liters volume (3 cu ft).
Must be hardwired in the location of use
Made in Canada.

ACCESSORIES:

OPTIONAL ACCESSORIES AT ADDITIONAL COST:
Autoclave Stand, With Shelf
Tray, 12 X 20 X 2"
Tray, 12 X 20 X 4"
Tray, 12 X 20 X 6"
Basket, 12 X 20 X 2"
Basket, 12 X 20 X 4"
Sterilizer Exhaust Condenser

---