Labconco Protector ST 5065510 ULPA Filtered Glove Box

Product Description
Inlet and outlet ULPA filtration is 99.9% efficient on 0.12 micron particulate and rated for 70 CFM at less than 1.00 in. static pressure. Features particulate containment less than 20 nangrams per cubic meter and meets ISO class 3 standards. Includes built-in blower.

Primary features of this glove box include:
~ Fast 'clean up time.' 0.05 ppm average tracer gas levels or less detected during perimeter scan testing (surpasses ASHRAE 110 standards) after 5 minute dilution.
~ Airborne particulate cleanliness (measured under positive and negative pressures per ISO 14644-1 test method) exceeds ISO Class 5 conditions (equivalent to Class 100) and achieves ISO Class 4 conditions.
~ Factory leak-tested with a mass spectrometer while pressureized with helium at 1 inch of water gauge. No detectable leaks greater than 1 x 10-6 ml/sec.
~ Inlet and outlet particulate (ULPA) filters to prevent contaminants from entering or leaving the glove box chamber.
~ Test port for challenging ULPA filter integrity.
~ True Bag-In/Bag-Out Filter Disposal System for safe filter removal and replacement.
~ LCD display provides real time monitoring of volume dilution rates in cubic feet per minute (CFM), air changes/minute (ACM), and main chamber pressure (inches of water).
~ Built-in blower with speed control capable of airflow from 15 CFM to 85 CFM.
~ Large viewing area, 36 in. w x 27.6 in. high, provides maximum visibility. Viewing window is 3/8 in. thick, laminated safety glass.
~ Space-saving inner and outer transfer chamber doors that pivot upward, are counterbalanced and equipped with quick-latches.
~ Interior right-hand side wall-mounted pass-through plug for on-site installation of an optional accessory: electrical outlet, RS-232 port, gas/liquid port, or port for oxygen or moisture monitor.
~ Pair of neoprene gloves, 0.015 in. thick, 30 in. long, size 9 ¾.
~ Switches for light, blower and electrical duplex.
~ Two 8 in. ID, epoxy-coated aluminum double-grooved glove ports mounted 17 in. apart, with neoprene gaskets.
~ Two 25-watt fluorescent lights that exceed 100 footcandles.
~ Dry-powder epoxy-coated, 18 and 20 gauge steel exterior panels.
The following link provides additional information from the manufacturer's brochure. Click to open the PDF in a new window or right-click to download it:
Labconco Protector ST 5065510 ULPA Filtered Glove Box or copy the following into your browser address window: labequip.ca/stock/pictures/n1918.pdf
Made in USA.

ACCESSORIES:

REQUIRED ACCESSORIES:
Adjustable Height Base Stands

OPTIONAL ACCESSORIES AVAILABLE AT ADDITIONAL COST:
Balance Vibration Isolator
Anti-Static Ionizer Fan
Gloves and Glove Box Accessories
HEPA Inlet or Exhaust Filter

---