Labconco 5220100 Controlled Atmosphere Glove Box

Product Description
This controlled atmosphere glove box is ideal for applications involving low oxygen or moisture levels, such as organometallics, energy cells and hydrophilic chemicals among others.

This units primary features include:
~ One-piece molded, medium-density polyethylene shell. Labconco recommends this website for a comprehensive listing of chemical resistance data for polyethylene.
~ Dry powder epoxy-coated steel superstructure
~ 1/4 in. thick laminated safety glass viewing window, 26.4 in. wide x 12.5 in. high, removable for loading equipment, with powder-coated steel frame and neoprene gasket
~ Space-saving inner and outer transfer chamber doors that pivot upward, are counterbalanced and equipped with quick-latches
~ Black, chemical-resistant work surface sealed to the glove box floor
~ Pressure relief valve that activates at pressure/vacuum above 6 inches or below -6 inches of water gauge.
~ Pressure relief valve vent, 4 in. nominal diameter
~ Interior ceiling-mounted electrical duplex receptacle with 5 amp maximum circuit load
~ Neoprene gloves, size 9 3/4, are included.
~ Fluorescent lamp, 22 watts, with easy replacement from the top
~ Switches for light and innermost interior electrical receptacle
~ Approximately 13 cubic feet of interior space in main chamber
~ 11.0 in. nominal ID x 12.0 in. long transfer chamber
~ Factory leak tested with a mass spectrometer while glove box is pressurized with helium at 5 inches of water gauge.
~ No detectable leaks greater than 1 x 10(-4) ml/sec
~ Meet Class 1 atmosphere containment conditions for oxygen leak rates per ISO 10648-2 test method
~ Six manual valves for purging and filling of both main chamber and transfer chamber and for drying train connections
~ Main chamber pressure gauge with readings from -5 to +5 inches of water gauge
~ Transfer chamber pressure gauge with readings from 0 to -29 inches of mercury
~ Transfer chamber high vacuum sleeve and interior interlocking shelf of dry powder epoxy-coated steel

There are international electrical configurations available.
The following link provides additional information from the manufacturer's brochure. Click to open the PDF in a new window or right-click to download it:
Labconco 5220100 Controlled Atmosphere Glove Box or copy the following into your browser address window: labequip.ca/stock/pictures/n1919.pdf
Made in USA.

ACCESSORIES:

REQUIRED ACCESSORIES:
Rotary Vane Direct Drive Vacuum Pumps
Adjustable Height Base Stands
Base Cabinet
Work Surface
Inert gas for filling

OPTIONAL ACCESSORIES AVAILABLE AT ADDITIONAL COST:
Acrylic Viewing Window
Automatic Pressure Controller
Diaphragm Pumps
Electrical Power Strips
Exterior Transfer Chamber Shelf
External Glove Port Covers
Gas Fill/Vacuum Purge Tubing Kits
Gloves and Glove Box Accessories
Hanging Shelf Accessories
Hygrometers
Oxygen and Moisture Removal Column
Oxygen Monitors
Pressure Relief Valve Vent Kits
Remote Blowers
Storage Shelf Kits
Trap Inserts

---