Product Description
Determines oxidation stability of mineral transformer oils by measuring the amount of sludge and acid formed under prescribed accelerated aging conditions
Capacity for 6 samples
Digital temperature control with digital display and over-temperature cut-off
Constant temperature oil bath for testing oxidation stability of mineral insulating oils. Immerses six oil receptacles at the required depth per ASTM specifications at 110°C ± 0.5°C, and controls oxygen flow to each sample at the rate of 1L/h ± 0.1L/h through six independent flowmeters mounted on a common manifold. Insulated double-wall stainless steel bath has microprocessor temperature control with °C/°F switchable digital setpoint and display. Operator and equipment are protected by an overtemperature control circuit which automatically interrupts power to the unit when bath temperature exceeds a programmed cut-off point. Order bath thermometer drying tower and catalyst separately.
Capacity: 6 Samples
Temperature: Range: Ambient to 230°F (110°C)
------------ Control Stability: ±0.09°F (±0.05°C)
Bath Medium: 7.2 gal (27.2 L) white technical oil
The following link provides additional information from the manufacturer's brochure. Click to open the PDF in a new window or right-click to download it:
Koehler K64100 / K64190 Petroleum Oxidation Stability Tester or copy the following into your browser address window: labequip.ca/stock/pictures/n2285.pdf
Made in USA.
ACCESSORIES:
OPTIONAL ACCESSORIES AVAIABLE AT ADDITIONAL COST: - K12130 Copper Catalyst Coils - Sealed in a glass jar with a nitrogen atmosphere. Pack of 24 (12 sets)
- 332-005-010 Drying Tower 250mL with ground glass stopper and side tubes
- 332-005-011 Glass Filter Crucible
- 250-000-95C ASTM 95C Thermometer - Range: 100 to 130°C
- 355-001-001 White Technical Oil - 1 gal container
- 355-001-003 White Technical Oil - 5 gal container
PROUDLY CANADIAN - We Ship Worldwide
