Product Description
Oxidation Stability of Fuels, Solid Block Bath
Provides an indication of the tendency of gasoline and aviation fuels to form gum in storage. The sample is oxidized inside a stainless steel pressure vessel initially charged with oxygen at 100psi (689kPa) and heated in a solid block bath. The amount of time required for a specified drop in pressure (gasoline) or the amount of gum and precipitate formed after a specific aging period (aviation fuels) is determined.
Solid Block Oxidation Baths:
4-vessel insulated aluminum block bath. Baths feature microprocessor temperature control with built-in overtemperature protection and dual LED displays for the setpoint and actual values in °C/°F format. The solid block design offers operating advantages over the boiling water baht, and meets temperature contrl and other requirements of ASTM and related methods. It should be noted, however, that many applicable specifications for this test method call for a liquid bath medium. Housed in an insulated steel cabinet with chemical-resistant polyurethane enamel finish. Includes lids for pressure vessel ports. Order thermometer separately.
Insulated aluminum block baths available in two or four-unit capacity. Baths feature microprocessor temperature control with built-in overtemperature protection and dual LED displays for setpoint and actual temperature values in °C/°F format. The solid block design offers operating advantages over the boiling water bath, and meets temperature control and other requirements of ASTM and related methods. It should be noted, however, that many applicable specifications for this test method call for a liquid bath medium. Housed in an insulated steel cabinet with chemical-resistant polyurethane enamel finish. Includes lids for pressure vessel ports. Order thermometer separately.
Conforms to the specifications of: ASTM D525, D873; IP 40, IP 138; ISO 7536; DIN 51780, 51799; FTM 791-3352, 791-3354; NF M 07-012, 07-013
Maximum Temperature: 250°F (121°C)
Solid block baths meet temperature control and other requirements of ASTM and related methods. While the aluminum block design offers operating advantages over the standard boiling water bath, it should be noted that many applicable specifications for this test call for a liquid bath medium. Please refer to the test method for the specific requirements.
The following link provides additional information from the manufacturer's brochure. Click to open the PDF in a new window or right-click to download it:
Koehler K10403 / K10493 Oxidation Bath for Petroleum or copy the following into your browser address window: labequip.ca/stock/pictures/n1170.pdf
Made in USA.
ACCESSORIES:
OPTIONAL ACCESSORIES AVAILABE AT ADDITIONAL COST:
K10500 Oxidation Pressure Vessel
K10540 Glass Sample Container & Cover with pour spout
K10540/C Glass Sample Container Cover Only
K10510 Gasket - Replacement composition gasket for K10500 Oxidation Pressure Vessel
K10551 Pressure Line - For pressurizing Oxidation Pressure Vessel. 6 ft. (1.83m) long, with quick release coupling for needle valve on pressure vessel and threaded fitting for oxygen tank
- K10556 Oxygen Manifold Pressure Relief System - Connects to oxygen source to prevent overcharging of vessel. Equipped with relief valve to vent at 125psi and 300 series stainless steel 150psi burst disk assembly. Constructed from 300 series stainless steel. Cleaned for oxygen service
K10520 Wrench - For tightening seal on Oxidation Pressure Vessel
K10530 Table Socket - Installs in benchtop to aid in tightening seal on Oxidation Pressure Vessel
K10560 Bronze Tubing - For connecting pressure recorder to vessel. Flexible seamless helical tubing with protective armor braid and connections. 5 ft (1.52m) long
K10525 Burst Disk Assembly - Retrofit kit for Oxidation Pressure Vessel without burst disk assembly
250-000-22F ASTM 22F Thermometer-Range: 204 to 218°F
250-000-22C ASTM 22C Thermometer- Range: 95 to 103°C
PROUDLY CANADIAN - We Ship Worldwide
