BYK-Gardner byko-drive S 2139 / 2140 Automatic Film Applicator

Product Description
The byko-drive S is designed to assist the user in achieving consistent film application by maintaining a consistent speed and drawdown pressure. It is compatible with virtually all applicators, both bar and wire types.
Manual drawdowns are often inconsistent, especially between operators. This makes test comparisons between samples either difficult or unreliable. Other factors that can affect drawdowns are the shear rate and the pressure placed on the applicator tool. The byko-drive employs a precise speed control along with a consistent weight to suit the particular material being applied.

FEATURES:
~ The applicator is placed in front of the pushbar so that the applicator is pushed along the test surface once the byko-drive S is started. With both the speed and weight controlled, a consistent and uniform film is produced.
~ Programmable speeds from 2 - 200 mm/sec or 0.1 - 7.9 in/s in 1mm/sec (0.1 in/sec) increments
~ Adjustable push-bar gap clearance for thicker substrates or large height applicators
~ Built in drying time modes from 4 mins to 4 hours (optional 2141 drying time attachment required)
~ User definable start position and stroke length to accommodate a wide range of chart sizes
~ Weight bar options to change the downward force on the applicator
~ 8 selectable languages: English, German, French, Spanish, Italian, Chinese, Japanese, Russian
~ Metric and English units
~ Vacuum plate requires external vacuum source
~ Can accommodate virtually all applicators and wire rods without additional hardware
~ Drip pan for easy cleanup

The byko-drive may be equipped with either a vacuum plate or a glass plate with clamp. The vacuum plate requires an external vacuum source to hold a test sample in place. The glass plate model uses a spring-loaded clamp to hold the sample. A wide variation in speeds is available, from 2mm/sec to 200mm/sec (.5 inch/sec to 7.9 inch/sec). The micro-controller electronics of the byko-drive ensures accurate speed control under all operating conditions.

The byko-drive S also has a drying time function that allows the instrument to perform a drying time test immediately after a drawdown is performed. The optional linear drying time accessory (sold separately) attaches to the pushbar. The Drying time can be adjusted from 4 mins to 4.5 hours.

SPECIFICATIONS:
Traverse Speed: 0.1 - 7.9 inches/s (2 - 200 mm/s)
Traverse Speed Accuracy: 1% of set speed
Speed Display Resolution: 0.1 in/sec (1 mm/sec)
Wire Bar Diameter Maximum: 0.6 in (15 mm)
Wire Bar Length Maximum: 24 in (600 mm)
Test Panel Size Maximum: 9 x 12 in (229 x 305 mm)
Stroke Length Maximum: 235 mm
Setup Memories: 6
Push-bar Gap Clearance: 2 - 39 mm (0.08 - 1.54 in)
Push-bar Weight: 500 g standard (up to 1500 g optional)
The following link provides additional information from the manufacturer's brochure. Click to open the PDF in a new window or right-click to download it:
BYK byko-drive S 2139 / 2140 Automatic Film Applicator or copy the following into your browser address window: labequip.ca/stock/pictures/n1458.pdf
Made in USA.

ACCESSORIES:

COMES COMPLETE WITH:
Byko-drive S, with glass or vacuum plate
Push-bar weight, 500g, S (2142)
External Power Supply
Power cords (US,EU)
Drip pan (2125)
Manual

OPTIONAL ACCESSORIES AVAILABLE AT ADDITIONAL COST:
2125 Drip Pan
2138 Screen Protector
3879 vacuum pump

---