Product Description
The AccuTemp 3.2cu ft vacuum oven comes standard with the secondary over-temp protection dial, stainless steel tubing (refers to internal tubing and compression. external tubing not included), stainless steel vacuum & vent valve, oil-filled vacuum gauge.
With the internal shelf heating technology, each shelf in these ovens has its own heater, in-shelf temperature sensor and temperature controller, together with great thermal-conductive aluminum and our new low proportional controller technologies, the result is perfect uniformity, accurate temperature, super-fast heating rates, minimum heat loss/exterior temperature and very low power consumption.
FEATURES:
~ New KF25 inlet filter keeps your oven clean at all time (included with oven purchase).
~ All stainless steel internal tubing provides higher ultimate vacuum, holds vacuum 10 times longer, and require minimum maintenance.
~ Oil-filled mechanical vacuum gauge provides more accurate reading, longer gauge life and minimizes shipping damage.
~ All stainless steel vacuum and vent valves gives you cleaner connection, more accurate control and long term durability.
~ Three alumimum heating shelves with individual in-shelf temperature sensor, temperature controller and heater.
~ Dual layer observation window with 5/8 in. tempered safety glass.
~ 4th gen low proportional gain temperature controllers keep your oven temperature accurate
~ Easy-to-clean stainless steel interior for exceptional durability and ease of maintenance.
~ A vacuum environment lowers the boiling point (great for processing heat sensitive materials) and reduces drying time for materials like paste or powder which cannot otherwise be easily dried.
~ Built-in swivel casters with leveling feet
~ Built-in alarm alerts you when oven has been shut down by safety circuitry due to out of range temperature.
~ For improved temperature tracking, run the auto-tune procedure as outlined in the manual.
~ Best choice for the curing and converting of oil extracts. With deep vacuum level, they can operate at temperatures which allow the degassing/purging process to occur rapidly, thus increase productivity and allow for the production of superior quality products with minimal processing time.
SPECIFICATIONS:
~ Capacity: 3.2 cubic feet
~ Heater: 500 watts x 3, built into 3 aluminum shelves, for the fastest, most energy efficient
~ and uniform heating.
~ Controller: low proportional gain, microcomputer PID controlled with LCD display
~ Range: ambient to 250°C (or 480°F)
~ Display units: Fahrenheit or Celsius
~ Uniformity: +/- 5% of setpoint
~ Dwelling timer range: 1 to 9999 minutes
~ Warm-up time to 100°F: 35 minutes
~ Warm-up time to 480°F: 60 minutes
~ Ultimate vacuum level: better than 500 microns/millitorrs (may vary based on your altitude)
~ Mechanical gauge range: 0 to 30 inch mercury
~ Vacuum port: KF25 flange x 1
~ Vent port: KF25 flange x 1
~ Vacuum pump: Sold separately
~ Heated shelves: 3 non-removalbe aluminum shelves, 17.5 x 17.25 in. each
~ Optional stackable aluminum shelves: 17.5 x 17.25 x 2.25 in. (WxDxH)
~ Total area without stackable shelves: 302 x 3 = 6 sq ft or 906 inch2
~ Total area with 3 stackable shelves: 302 x 6 = 12 sq ft or 1812 inch2
~ Distance between shelves (without stackable shelves): 4.75 inches
~ Distance between shelves (with 3 stackable shelves): 2.25 inches
~ Observation window: 1/2 in. tempered safety glass
~ Safety: Built-in circuit breaker
~ Overheat shutoff protection
~ Secondary over-temp protection dial
~ In-door lights: White LED
The following link provides additional information from the manufacturer's brochure. Click to open the PDF in a new window or right-click to download it:
Across Accutemp AT32-UL Vacuum Oven or copy the following into your browser address window: labequip.ca/stock/pictures/n1714.pdf
ACCESSORIES:
COMES COMPLETE WITH:
KF25 quick clamp and centering ring
Led Light Cable
Users manual
OPTIONAL ACCESSORIES AVAILABE AT ADDITIONAL COST:
vacuum pump
upgrate to 316 Stainless steel chamber
additional aluminum shelves
mobile cart